top of page
RUTX11

RUTX11

SKU: 364215376135191
€508.00Price

RUTX11 is a very powerful device equipped with Dual-SIM with auto Failover, Backup WAN, and other SW features.

A wide range of internal hardware interfaces allows this product to be used in power-hungry industrial applications where speed and robustness are at the heart of the solution.

 

4G LTE – Cat 6 DL up to 300 Mbps in sync with 4 x 1 Gbit Ethernet ports allows for a seamless data transfer experience with auto-failover and a backup WAN.

Bluetooth LE allows sensors to be connected directly to the router, thus minimizing the overall solution ecosystem.

Colour: Silver
  • PRODUCT INFO

    4G (LTE) – Cat 6 up to 300 Mbps, 3G – Up to 42 Mbps

  • RETURN & REFUND POLICY

    All Standard Stock items can be returned with 14 days of dispatch for refund provided they are in there orignal sealed packaging unopened.

    No opened products can be returned other than items covered under the products warranty 

  • SHIPPING INFO

    all goods are shipped to the contact and address provided by the customer, shipping charges apply as per rates for selected option.

    Free shipping is standard and subject to the transaction value as stated in the offer. 

  • Technical Specs

    MOBILE
    Mobile module    4G (LTE) – Cat 6 up to 300 Mbps, 3G – Up to 42 Mbps
    SIM switch    2 SIM cards, auto-switch cases: weak signal, data limit, SMS limit, roaming, no network, network denied, data connection fail
    Status    Signal strength, SINR, RSRP, RSRQ, Bytes sent/received, connected band, carrier aggregation, IMSI, ICCID
    SMS    SMS status, SMS configuration, send/read SMS via HTTP POST/GET, Email to SMS, SMS to Email, SMS to HTTP, SMS to SMS, SMS auto reply
    USSD    Supports sending and reading Unstructured Supplementary Service Data messages
    Black/White list    Operator black/white list
    Multiple PDN    Possibility to use different PDNs for multiple network access and services
    Band management    Band lock, Used band status display
    APN    Auto APN
    Bridge mode    Direct connection (bridge) between mobile ISP and device on LAN
    WIRELESS
    Wireless mode    802.11b/g/n/ac Wave 2 (WiFi 5) with data transmission rates up to 867 Mbps (Dual Band, MU-MIMO), 802.11r fast transition, Access Point (AP), Station (STA)
    WiFi security    WPA3-EAP, WPA3-SAE, WPA2-Enterprise-PEAP, WPA2-PSK, WEP; AES-CCMP, TKIP, Auto Cipher modes, client separation
    ESSID    ESSID stealth mode
    WiFi users    up to 150 simultaneous connections
    Wireless Hotspot    Captive portal (Hotspot), internal/external Radius server, built in customizable landing page
    ETHERNET
    WAN    1 x WAN port (can be configured as LAN) 10/100/1000 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover
    LAN    3 x LAN ports, 10/100/1000 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover
    BLUETOOTH
    Bluetooth 4.0    Bluetooth low energy (LE) for short range communication
    NETWORK
    Routing    Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, EIGRP, NHRP)
    Network protocols    TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, FTP, SMTP, SSL v3, TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet client, SNMP, MQTT, Wake on LAN (WOL), DLNA
    VoIP passthrough support    H.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets
    Connection monitoring    Ping Reboot, Wget reboot, Periodic Reboot, LCP and ICMP for link inspection
    Firewall    Port forwards, traffic rules, custom rules
    DHCP    Static and dynamic IP allocation, DHCP Relay, Relayd
    QoS / Smart Queue Management (SQM)    Traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11e
    DDNS    Supported >25 service providers, others can be configured manually
    Network backup    VRRP, Mobile, Wired and WiFi WAN options, each of which can be used as an automatic Failover
    Load balancing    Balance Internet traffic over multiple WAN connections
    SSHFS    Possibility to mount remote file system via SSH protocol
    SECURITY
    Authentication    Pre-shared key, digital certificates, X.509 certificates
    Firewall    Pre-configured firewall rules can be enabled via WebUI, unlimited firewall configuration via CLI; DMZ; NAT; NAT-T
    Attack prevention    DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks)
    VLAN    Port and tag based VLAN separation
    Mobile quota control    Custom data limits for both SIM cards
    WEB filter    Blacklist for blocking out unwanted websites, Whitelist for specifying allowed sites only
    Access control    Flexible access control of TCP, UDP, ICMP packets, MAC address filter
    VPN
    OpenVPN    Multiple clients and a server can run simultaneously, 12 encryption methods
    OpenVPN Encryption    DES-CBC, RC2-CBC, DES-EDE-CBC, DES-EDE3-CBC, DESX-CBC, BF-CBC, RC2-40-CBC, CAST5-CBC, RC2-64-CBC, AES-128-CBC, AES-192-CBC, AES-256-CBC
    IPsec    IKEv1, IKEv2, with 5 encryption methods for IPsec (DES, 3DES, AES128, AES192, AES256)
    GRE    GRE tunnel
    PPTP, L2TP    Client/Server instances can run simultaneously, L2TPv3 support
    Stunnel    Proxy designed to add TLS encryption functionality to existing clients and servers without any changes in the program’s code
    DMVPN    Method of building scalable IPsec VPNs
    SSTP    SSTP client instance support
    ZeroTier    ZeroTier VPN client support
    WireGuard    WireGuard VPN client and server support
    MODBUS
    MODBUS TCP SLAVE
    ID filtering    Respond to one ID in range [1;255] or any
    Allow remote access    Allow access through WAN
    Custom registers    MODBUS TCP custom register block, which allows to read/write to a file inside the router, and can be used to extend MODBUS TCP slave functionality
    MODBUS TCP MASTER
    Supported functions    01, 02, 03, 04, 05, 06, 15, 16
    Supported data formats    8 bit: INT, UINT; 16 bit: INT, UINT (MSB or LSB first); 32 bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC), HEX, ASCII
    MQTT GATEWAY
    Gateway    Allows sending commands and receiving data from MODBUS Master through the MQTT broker
    DNP3
    Supported modes    TCP Master, DNP3 Outstation
    DATA TO SERVER
    Protocols    HTTP(S), MQTT, Azure MQTT, Kinesis
    MONITORING & MANAGEMENT
    WEB UI    HTTP/HTTPS, status, configuration, FW update, CLI, troubleshoot, event log, system log, kernel log
    FOTA    Firmware update from server, automatic notification
    SSH    SSH (v1, v2)
    SMS    SMS status, SMS configuration, send/read SMS via HTTP POST/GET
    Call    Reboot, Status, Mobile data on/off, Output on/off
    TR-069    OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem
    MQTT    MQTT Broker, MQTT publisher
    SNMP    SNMP (v1, v2, v3), SNMP trap
    JSON-RPC    Management API over HTTP/HTTPS
    MODBUS    MODBUS TCP status/control
    RMS    Teltonika Remote Management System (RMS)
    IoT PLATFORMS
    Clouds of things    Allows monitoring of: Device data, Mobile data, Network info, Availability
    ThingWorx    Allows monitoring of: WAN Type, WAN IP, Mobile Operator Name, Mobile Signal Strength, Mobile Network Type
    Cumulocity    Allows monitoring of: Device Model, Revision and Serial Number, Mobile Cell ID, ICCID, IMEI, Connection Type, Operator, Signal Strength, WAN Type and IP
    Azure IoT Hub    Can send device IP, Number of bytes send/received, Mobile connection state, Network link state, IMEI, ICCID, Model, Manufacturer, Serial, Revision, IMSI, SIM State, PIN state, GSM signal, WCDMA RSCP, WCDMA EC/IO, LTE RSRP, LTE SINR, LTE RSRQ, CELL ID, Operator, Operator number, Connection type, Temperature, PIN count to Azure IoT Hub server
    SYSTEM CHARACTERISTICS
    CPU    Quad-core ARM Cortex A7, 717 MHz
    RAM    256 MB, DDR3
    FLASH storage    256 MB, SPI Flash
    FIRMWARE / CONFIGURATION
    WEB UI    Update FW from file, check FW on server, configuration profiles, configuration backup
    FOTA    Update FW/configuration from server
    RMS    Update FW/configuration for multiple devices at once
    Keep settings    Update FW without losing current configuration
    FIRMWARE CUSTOMIZATION
    Operating system    RutOS (OpenWrt based Linux OS)
    Supported languages    Busybox shell, Lua, C, C++
    Development tools    SDK package with build environment provided
    LOCATION TRACKING
    GNSS    GPS, GLONASS, BeiDou, Galileo and QZSS
    Coordinates    GNSS coordinates via WebUI, SMS, TAVL, RMS
    NMEA    NMEA 0183
    Server software    Supported server software: TAVL, RMS
    Geofencing    Configurable multiple geofence zones
    USB
    Data rate    USB 2.0
    Applications    Samba share, USB-to-serial
    External devices    Possibility to connect external HDD, flash drive, additional modem, printer
    Storage formats    FAT, FAT32, exFAT, NTFS (read-only), ext2, ext3, ext4
    INPUT/OUTPUT
    Input    1 x Digital Input, 0 - 6 V detected as logic low, 8 - 30 V detected as logic high
    Output    1 x Digital Output, Open collector output, max output 30 V, 300 mA
    Events    SMS, Email, RMS
    POWER
    Connector    4-pin industrial DC power socket
    Input voltage range    9 – 50 VDC, reverse polarity protection, voltage surge/transient protection
    PoE (passive)    Passive PoE. Possibility to power up through LAN port, not compatible with IEEE802.3af, 802.3at and 802.3bt standards
    Power consumption    16 W Max
    PHYSICAL INTERFACES (PORTS, LEDS, ANTENNAS, BUTTONS, SIM)
    Ethernet    4 x RJ45 ports, 10/100/1000 Mbps
    I/Os    1 x Digital Input, 1 x Digital Output on 4-pin power connector
    Status LEDs    4 x WAN type LEDs, 2 x Mobile connection type, 5 x Mobile connection strength, 8 x LAN status, 1 x Power, 2 x 2.4G and 5G WiFi
    SIM    2 x SIM slots (Mini SIM - 2FF), 1.8 V/3 V, external SIM holders
    Power    1 x 4-pin DC connector
    Antennas    2 x SMA for LTE, 2 x RP-SMA for WiFi, 1 x RP-SMA for Bluetooth, 1 x SMA for GNSS
    USB    1 x USB A port for external devices
    Reset    Reboot/User default reset/Factory reset button
    Other    1 x Grounding screw
    PHYSICAL SPECIFICATION
    Casing material    Aluminium housing with DIN rail mounting option
    Dimensions (W x H x D)    115 x 44.2 x 95.1 mm
    Weight    456 g
    Mounting options    DIN rail, flat surface placement
    OPERATING ENVIRONMENT
    Operating temperature    -40 °C to 75 °C
    Operating humidity    10 % to 90 % non-condensing
    Ingress Protection Rating    IP30
    REGULATORY & TYPE APPROVALS
    Regulatory & Type Approvals    CE/RED, RoHS, REACH
    Vehicle    ECE R10 (E-mark)
    EMI IMMUNITY
    Standards    EN 55032:2015, EN 55035:2017, Draft ETSI EN 301 489-1 V2.2.1, ETSI EN 301 489-3 V2.1.1, Draft ETSI EN 301 489-17 V3.2.0
    ESD    EN 61000-4-2:2009
    RS    EN 61000-4-3:2006+A1:2008+A2:2010
    EFT    EN 61000-4-4:2012
    Surge protection    EN 61000-4-5:2014
    CS    EN 61000-4-6:2014
    DIP    EN 61000-4-11:2004
    RF
    Standards    ETSI EN 300 328 V2.1.1, ETSI EN 301 893 V2.1.1, ETSI EN 300 440 V2.1.1
    SAFETY
    Standards    IEC 62368-1:2014 (Second Edition) EN 62368-1:2014+A11:2017 EN 50385:2017 EN 62232:2017

bottom of page